Take “No service” on your iPhone? 13 ways to fix it

Your iPhone shows a “No Service” message when it fails to connect to your mobile service provider. Unfortunately, if you live in an area with weak cell phone reception, that’s something you could face a lot. If not, it could be due to faulty software or incorrectly configured network settings.

Work your way through the list of solutions below and you should be able to fix the “No Service” problem on your iPhone and start making and receiving calls again.

1. Airplane Mode On/Off

Turning Airplane Mode on and off restarts the cellular radio inside your iPhone. That should eliminate minor glitches in the firmware that prevent it from connecting to your wireless carrier.

Start by swiping down from the top left of the screen to reveal the Control Center. Then tap Airplane mode and wait 10 seconds before tapping the icon again.

Airplane mode is off

2. Enable data roaming

If you get a “No Service” error while traveling abroad, you may have turned off roaming on your iPhone. To fix that, visit Setting > Mobile > Mobile data options and turn on the switch next to it Data roaming.

Data roaming is enabled

You may want to turn off roaming when the device is not in use to avoid overcharging. However, that shouldn’t be a problem if you’ve already set up a roaming plan with your carrier.

3. Turn off Automatic Network Selection

Manually selecting the correct wireless network can also solve the “No Service” issue on your iPhone.

Start by opening the Settings app on your iPhone and selecting Mobile > Network selection. Follow by turning off the side switch Automatic. On the list of service providers that then appears, select your mobile service provider.

Cellular > Network Selection > Auto” class=”wp-image-13190″  /></figure>
</div>
<h2><span class=4. Switch between voice and data settings

Switching between your cellular connection’s voice and data settings can “push” your iPhone to communicate with your mobile operator.

To do that, go to Setting > Mobile > Voice & Data and messing around with the available data options (5G, 4G, 3Getc) and voice configuration.

Voice & data options

5. Enable Wi-Fi Calling

Did you know that weak cell reception can occur indoors, even if there are multiple cell towers nearby? The type of building material entering the building and destructive interference from surrounding structures often causes it. However, if you can get a signal on your iPhone outside, you’ve found the problem.

Investing in a portable repeater is a great way to boost weak signals in places you frequent, like your home. But you can also try enabling Wi-Fi calling on your iPhone as a temporary fix.

Go Setting > Mobile > Call over Wi-Fi and turn on the switch next to it Call over Wi-Fi on this iPhone.

Call over Wi-Fi on this selected phone

6. Restart your iPhone

Restarting your iPhone can fix most problems that appear randomly. If you continue to see the error “No service”try doing it now.

Start by mining Turn off Below Setting > Shared. Then hold and drag Power icon on the right to turn off the device. When the screen goes dark, wait at least 30 seconds before pressing and holding Edge to restart it.

Slide to power off screen

7. Force restart your iPhone

If the “No Service” error is accompanied by a system-wide freeze that prevents you from restarting your iPhone normally, a force restart can help. That involves pressing or holding a set of buttons in a specific order depending on the device model.

iPhone 8 series and newer: Press and release Volume up press and release button Turn down the volume and press and hold the . button Edge until you see the Apple logo.

Apple logo

iPhone 7 and iPhone 7 Plus: Hold the Edge and Turn down the volume at the same time until the Apple logo appears on the screen.

iPhone 6s Plus or later: Hold Edge and Home and at the same time until you see the Apple logo.

8. Check carrier settings for updates

The “No Service” status error can also occur due to issues with carrier settings on your iPhone. Your mobile carrier may have pushed an update to fix that. However, if you do not receive an automatic prompt asking you to install it, you must manually enable the update.

Start by connecting to a Wi-Fi network. Then go to Setting > Shared > About and scroll down until you see details related to your carrier.

General > About us” class=”wp-image-13195″  /></figure>
</div>
<p>Wait at least 30 seconds.  If one <strong>Update carrier settings</strong> notification pops up on the screen, tap <strong>Update </strong>to apply it.</p>
<h2><span class=9. System Software Update

Newer versions of iOS may include fixes for known software-related bugs that result in a “No Service” status on iPhone. If you haven’t updated your iOS device recently, visit Setting > Shared > Software updates and press Download and install.

Sometimes, iOS updates can also cause problems. When that happens, the next update will quickly take care of them. If you can’t wait, your only recourse is to downgrade your iPhone’s system software.

10. Eject and reinsert the SIM

Another quick fix involves taking out and reinserting the SIM card into your iPhone. You can use your device’s SIM eject tool or a bent paperclip for that. iPhone 12 and later have the SIM tray on the left side of the device, while older models have the SIM tray on the right side.

Illustration of SIM removed and reinserted

It’s also best to clean the SIM card contacts with a soft dry cloth before reinserting them inside. You can also try inserting it in another smartphone to rule out problems caused by a malfunctioning SIM.

11. Set the correct date and time

Having the wrong date and time on your iPhone can cause many problems with apps and services, including connection problems with mobile operators.

To fix that, visit Setting > Shared > Date and time and turn off the side switch Set automatically. Follow it by setting the time on your device manually. Make sure to set it up to match the time zone in your country or region.

Set Auto Switch to off

12. Reset network settings

Corrupt and conflicting network settings can further prevent your iPhone from communicating with your wireless service provider. Resetting them to their default configuration can help.

To start resetting network settings, go to Setting > Shared > Reset and press Reset Network Settings.

Reset Network Settings

After the reset procedure, you may receive a prompt to update your carrier settings. But most likely, it will happen automatically in the background.

13. Call your service provider

If none of the solutions above work, try contacting your wireless service provider for help. You may have a problem specific to your mobile account that nothing but a call to customer support can fix.

Still received “No service” on iPhone? Contact Apple

Normally, turning on Airplane Mode or restarting your iPhone almost always solves the “No Service” problem. However, if even your mobile carrier ringing does nothing to fix the problem, you may be looking at a faulty cellular modem or another hardware-related problem. hard. So your next move is to book an appointment at the local Genius Bar.

Leave a Reply

Your email address will not be published.